HIGH SPEED IMPACT TEST DEVICES

Compressed air cannon for visors test, 200 m/sec with compressed gas, 6 mm, sphere and 1⁄4“ spheres, Diablo pellets launched, two loading systems, 2 barrels, electronic speed recording and pressure control from PC.

TECHNICAL FEATURES:

• Frame made by ITEM aluminium profile.
• Loading air pressure steel tank with 500 cm3 capacity.
• Special shooting high speed opening valve, actuated by a pneumatic cylinder.
• Loading air pressure system with digital pressure gauge.
• Electronic speed control on PC screen software included.
• Steel container made of steel with polycarbonate sheet window.
• Medium size resin headform according to EN168 or other shapes supplied.
• Dimension of shootable balls: 6 mm, 5 mm, 1/4″,4mm and Diablo pellets.
• Maximum speed: up to 300m/sec.at 60 bars.
• Gun barrels made of special steel (different callipers available)
• Adjustable support for samples protected by a chamber with polycarbonate window.
• Speed recording system made by laser illuminator and high speed receptors.
• Weight Kg.150
• Overall dimensions: mm 2100x500x1720

Compressed air cannon for visors test, 200 m/sec with compressed gas, 6 mm, sphere and ¼“ spheres, Diablo pellets launched, two loading systems, 2 barrels, electronic speed recording and pressure control from PC.

TECHNICAL FEATURES:

• Frame made by ITEM aluminium profile.
• Loading air pressure steel tank with 500 cm3 capacity.
• Special shooting high speed opening valve, actuated by a pneumatic cylinder.
• Loading balls are made automaticaly by pneumatic ylinder.
• Loading air pressure system with digital pressure gauge.
• Electronic speed control on PC screen software included.
• Steel container made of steel with polycarbonate sheet window.
• Medium size resin headform according to EN168 or other shapes supplied.
• Dimension of shootable balls: 6 mm, 5 mm, 1/4″,4mm and Diablo pellets.
• Maximum speed: up to 300m/sec.at 60 bars.
• Gun barrels made of special steel (different callipers available)
• Adjustable support for samples protected by a chamber with polycarbonate window.
• Speed recording system made by laser illuminator and high speed receptors.
• Notebook with electronic speed control software included.
• Weight Kg.130
• Overall dimensions: mm 2100x500x1720

Resistance against large dust particles test equipment (Dust Chamber) stainless steel cabinet with
sight glass door, high pressure fan, reflectometer and Smartwheel microprocessor.

TECHNICAL FEATURES:

• Chamber made by stainless steel with sealed front door provided with a glass.
• High speed and pressure fan with 1,5 kw 3 phases motor with inverter in order to adjust speed and pressure.
• Headform made by Silicon rubber and Alu core supplied.
• Recycling powder closed loop.
• Control panel with timers and command for fan starting.
• Reflectometer with Hg vapour UV lamp, collimation lens, Centronics 100 Sqmm photorecptor, low noise amplifier with
  operational circuit and measuring unit (digital voltage meter with LCD display) (the output can be also connected to a pc).

Equipment for testing resistance to gas and fine particles according to EN 168 ( Gas Chamber )

TECHNICAL FEATURES:

• Test chamber made by stainless steel with sealed front door provided with a glass.
• Frame made by ITEM alumium profiles.
• Small fan for air circulation inside the cabinet and 0,75 Kw motor with fan for rapid exhaust.
• Air pump sending pressure in to a bottle with liquid ammoniac.
• Automatic testing function controlled by a PLC with timers for quick settings.
• Headform made by silicon rubber and aluminium core supplied.
• Dimensions meters 0,6×0,6×1,55
• Weight Kg 70

Molten metal test equipment (EN 168 and other std.s) including silite stick 1450°C furnace (not displayed), crucibles and pneumatic operated ejecting system with safety enclosure.

TECHNICAL FEATURES:

The equipment is composed by two units:

1- Furnace, with silite rods able to heat iron balls, grey iron or aluminium up to melting point of 1450°C
(this last temperature only for grey Iron).

• These furnaces are composed of two separate units:
• Heating unit: contains a furnace with heat insulation (made of acid-proof aluminous refractory and micro-porous insulating refractory material) to obtain minimum heat dispersion, a pad cover is provided. The heating unit has silite rods on both sides of the furnace.
• Power unit: composed of a transformer with multiple outlets and a five-way switch to compensate for heating element wear.
• Temperature is controlled by a digital microchip control device combined with a platinum and rhodium thermocouple with ceramic sheath.
• Crucibles and other accessories necessary for testing are supplied.
• Silite furnace need 3 phases power supply of 10Kw.

2- Propulsion equipment

• Frame made by N. 4 , 30mm steel columns connection two heavy discs made by steel.
• Propulsion equipment actuated using a 60 mm pneumatic cylinder with big 5 ways valve.
• Site for crucible made by steel and fixed on the top of the cylinder rod.
• Mass to block the sample made by steel.
• Complete made by steel cabinet for protection.
• Remote control for safety purpose.
• (for this test total body protection suit against hot temperature is strongly recommended).

Increased robustness test equipment for lenses, free fall ball drop, 16/22/25.4 mm ball release
magnetic system.

TECHNICAL FEATURES:

• Frame made anodized aluminium.
• Ball release system actuated by electromagnet
• Laser beam focused on the headform eye for impact point
• EN168 medium size and ISEA headforms with aluminium core adjustable in different positions
• Protective cage with polycarbonate door
• Dimensions: 550x550x1770 MM
• Weight Kg.70